I have made several nice prints with iSANMATE wood filament. This the first "wood" filament I have tried it is 20% wood flour. The prints have ton of easily removed strings with all combinations of settings that I have tried. I have tried nozzle temperatures 200 and 210 with retraction ON and OFF and still lots of strings. I am using the standard 0.4 mm nozzle. I have used 50 for the bed temperature and it seems fine have had no adhesion issues. These strings are a nuisance but easily removed with a fingernail, x-acto or sandpaper, but again ALOT of strings. I have used Renaissance Wax to finish some sanded prints and they look nice. Photos are of a small sanded and waxed print and a pallet coffee coaster that has only been lightly sanded.