PLA ABS PETG 3D Printer Filament Extruder Machine | SONGHU Extruder

The final product shall be neat winding

We can make high-precision 3D Filaments of various colors

Our printed model has high accuracy


NO. 1 SHSJ-45MM Main Filament Extruder
The Filament extruder developed by Songhu can melt and extrude materials stably without color difference, hollow materials, bubbles in finished products and other problems, and the production capacity can reach 30-100m / min 

NO. 2 1.75mm and 3.0mm Filament Extruder Mould 

-----Steel Material: S136
-----Size: According to sample size
----One Mould can produce different diameter filament for 3D printer
Such as : Normal specification 1.75mm 3.0mm ,2.0mm 2.85mm

Filament of various colors can be finely extruded，Other materials, such as ABS, PLA, PC, PA, pet, PETG, Pei, PVA, peek can also be extruded smoothly.

NO. 3  6 meters Water Tank Cooling System 
The whole section of the water tank adopts the method of gradually reducing the temperature to gradually cool the consumables. The temperature at the end of the hot water tank can be adjusted to stabilize the forming of consumables and avoid the brittle fracture of Filaments caused by too fast cooling

-----Steel Material: S136
-----Size: 4meters Hot Water Tank and 2 meters Cold Water Tank 
----3D Adjustment 
----According different raw material can set different temp.  
Such as : ABS around 85 degree, PLA around 60 degree .etc. 


NO. 4 Dryer +Laser X + Four Wheels Puller 
The dryer can dry the moisture carried by the consumables after passing through the water tank, and the four-wheel tractor can adjust the speed to control the wire diameter. At the same time, the four-wheel traction device can better ensure the roundness of the finished consumables, and the caliper can dynamically measure the wire diameter of the filaments with an accuracy of ± 0.02mm

----High precision guide pillar to system
---- Screw center high regulation, Zhang He adjusted
----High efficiency, multi wedge belt abrasion resistance of the surface traction
----The precision of Frequency inverter controller
----Motor power: 0.75KW




NO. 5  8meters Storage Device 
The wire storage rack can store up to 100 meters of wire. Its function is to avoid the pollution caused by the falling of consumables to the ground due to too fast production speed during the replacement of filament

---The maximum line length: 100 meters
----Motor control: 0.75KW
----Tension control: magnetic particle clutch
----Wire diameter: 4.0mm
----Spool: 250mm


NO. 6  Auto Meter
 Before winding machine, there are a device to calculate how many meter already produced.

NO. 7 Neat Winding Machine
Songhu's self-service R & D technology can make the filaments are neat winding.Neat winding filaments can avoid the problems of wire jamming and winding in the printing process, which greatly attracts consumers

---The function of automatic meter
---Tension control device
---Automatic cable winding
---Servo Motor Control System