.jpg)
.jpg)
.jpg)
.jpg)
Songhu Expanding Machine For FEP PFA Heat Shrinkable Tube
FEP expanding machine is an equipment independently developed by Songhu for the production of FEP, PFA and other heat shrinkable tubes.
MOQ: 1 set.
Lead time: 40 working days.
Please contact us for the latest quotation.
MOQ: 1 set.
Lead time: 40 working days.
Please contact us for the latest quotation.
.jpg)
1. Equipment Introduction
FEP expanding machine is an equipment independently developed by Songhu for the production of FEP, PFA and other fluorine plastic thermoplastic tubes. The fuselage adopts an integrated stainless steel + aluminum frame structure, which greatly improves the overall stability of the fuselage. Adopting the positive pressure expansion method, the expansion form of one out of two, to improve the expansion efficiency. This machine features a heating system with three temperature zones, which can make the plastic pipe heated evenly and soften more completely. Heating step by step to ensure stable expansion and prevents rupture due to high temperature.
2. Equipment Use
The expanding machine expands FEP, PFA and other fluorine plastic pipes to make the plastic pipes have thermal shrinkage, so as to produce FEP heat shrink pipes.
3. Brief Introduction Of FEP Heat Shrinkable Tube
FEP heat shrink tubing has excellent wear resistance, chemical corrosion resistance and high temperature performance, especially suitable for high temperature occasions and chemical dissolution resistant environments.
Manufacturing process of FEP heat shrink tube:
FEP heat shrink tube forming process: FEP base tube manufacturing (using extruder to heat and pressure FEP pellet raw materials into FEP tube) - blowing (expanding with expanding machine) - cooling finalize - inspection - packaging - finished product.
4. Equipment Parameters And Characteristics:
Model: ZTJX-KZ-02
Input Power: 380V three-phase 5-wire 50/60HZ
Equipment Area: Length x width x height (800 x 800 x 135 cm)
Compressed Air: 100PSI clean, up to 300PSI nitrogen
Applicable Specifications: The outer diameter of the design product ranges from 1.5-10 mm, which can be achieved by replacing the molding die. The equipment is equipped with an expanded specification die.
Heating Chamber: according to the product process requirements, set the corresponding temperature value.
Molding Room: According to product requirements, replace different molding dies to achieve.
Cooling Chamber: non-contact water chamber cooling, to meet the cooling needs of products.
Traction Machine: two-wheeled traction, can achieve one out of two expansion needs.
Speed Adjustment: traction speed is adjustable, frequency conversion drive control.
Temperature Control: temperature control table set the corresponding temperature, according to the product process set freely.
Pressure Regulation: It can satisfy 0-300 PSI.
Boday Material: Aluminum alloy + stainless steel sealing plate.
Expansion Ratio: 1.3-1.4 times.
Expansion Speed: 5-10 min/m for single root
Model: ZTJX-KZ-02
Input Power: 380V three-phase 5-wire 50/60HZ
Equipment Area: Length x width x height (800 x 800 x 135 cm)
Compressed Air: 100PSI clean, up to 300PSI nitrogen
Applicable Specifications: The outer diameter of the design product ranges from 1.5-10 mm, which can be achieved by replacing the molding die. The equipment is equipped with an expanded specification die.
Heating Chamber: according to the product process requirements, set the corresponding temperature value.
Molding Room: According to product requirements, replace different molding dies to achieve.
Cooling Chamber: non-contact water chamber cooling, to meet the cooling needs of products.
Traction Machine: two-wheeled traction, can achieve one out of two expansion needs.
Speed Adjustment: traction speed is adjustable, frequency conversion drive control.
Temperature Control: temperature control table set the corresponding temperature, according to the product process set freely.
Pressure Regulation: It can satisfy 0-300 PSI.
Body Material: Aluminum alloy or stainless steel sealing plate.
Expansion Ratio: 1.3-1.4 times.
Expansion Speed: 5-10min/m for single root
Input Power: 380V three-phase 5-wire 50/60HZ
Equipment Area: Length x width x height (800 x 800 x 135 cm)
Compressed Air: 100PSI clean, up to 300PSI nitrogen
Applicable Specifications: The outer diameter of the design product ranges from 1.5-10 mm, which can be achieved by replacing the molding die. The equipment is equipped with an expanded specification die.
Heating Chamber: according to the product process requirements, set the corresponding temperature value.
Molding Room: According to product requirements, replace different molding dies to achieve.
Cooling Chamber: non-contact water chamber cooling, to meet the cooling needs of products.
Traction Machine: two-wheeled traction, can achieve one out of two expansion needs.
Speed Adjustment: traction speed is adjustable, frequency conversion drive control.
Temperature Control: temperature control table set the corresponding temperature, according to the product process set freely.
Pressure Regulation: It can satisfy 0-300 PSI.
Body Material: Aluminum alloy or stainless steel sealing plate.
Expansion Ratio: 1.3-1.4 times.
Expansion Speed: 5-10min/m for single root
Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.
.jpg)
