.JPG?imageView2/1/w/400/h/250)
This filament is not the easiest to print with but once you get it figured out, it does a terrific job. First of all, this is really soft TPU. This means that you will need a path from your extruder to your print head that is free of any gaps or crevices that the filament can bend into. Any small gab and the filament will take advantage of it and get stuck. The other important thing to remember is that printing slow
Read More.JPG?imageView2/1/w/400/h/250)
I have made several nice prints with iSANMATE wood filament. This the first "wood" filament I have tried it is 20% wood flour. The prints have ton of easily removed strings with all combinations of settings that I have tried. I have tried nozzle temperatures 200 and 210 with retraction ON and OFF and still lots of strings. I am using the standard 0.4 mm nozzle. I have used 50 for the bed temperature and it
Read More
.jpg?imageView2/1/w/100/w/100)
